Thinkpad T60p type 2007-8JG / Fedora 7/32bits

Réf. IBM UT08JFR
< dav [at] nnx [dot] com >

Chipset graphique : ATI Mobility FireGL V5250

Status : fonctionne mais nécessite des opérations

01:00.0 VGA compatible controller: ATI Technologies Inc M56GL [Mobility FireGL V5250] (prog-if 00 [VGA])
        Subsystem: Lenovo Unknown device 20a4
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Region 1: I/O ports at 2000 [size=256]
        Region 2: Memory at ee100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at ee120000 [disabled] [size=128K]
        Capabilities: <access denied>

Le driver fournit sur le site d'ATI n'est pas prévu pour fonctionner avec la version d'Xorg de Fedora 7 (voir pourquoi ici). J'ai donc dû utiliser un pilote plus récent, et j'ai pris chez ATI le driver pour les cartes radeon.

CPU : Intel Core 2 Duo T7600 - 2.33 GHz - bus 667 Mhz

Status : fonctionne sans manipulation après installation

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 CPU         T7600  @ 2.33GHz
stepping        : 6
cpu MHz         : 1000.000
cache size      : 4096 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 4658.22
clflush size    : 64

Mémoire

1 Go/3 (1 barrette) - 2 emplacements SODIMM (1 libre) - 667 MHz - PC2-5300 DDR2 SDRAM

HDD 100Go - Serial-ATA - 7200 tpm

Status : fonctionne sans manipulation après installation

Model Family:     Hitachi Travelstar 7K100
Device Model:     HTS721010G9SA00
Serial Number:    MPCZN7Y0J5DU1L
Firmware Version: MCZIC14V
User Capacity:    100,030,242,816 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:    Sat Sep  1 18:20:56 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)

Graveur DVD Dual Layer

Status : fonctionne sans manipulation après installation

hda: HL-DT-ST DVDRAM GSA-4083N, ATAPI CD/DVD-ROM drive
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)

ATA Version is:   5
ATA Standard is:  ATA/ATAPI-5 T13 1321D revision 3

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)

Audio

Status : fonctionne sans manipulation après installation

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
        Subsystem: Lenovo ThinkPad T60/R60 series
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 22
        Region 0: Memory at ee400000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express Unknown type IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
                Link: Latency L0s <64ns, L1 <1us
                Link: ASPM Disabled CommClk- ExtSynch-
                Link: Speed unknown, Width x0
        Capabilities: [100] Virtual Channel
        Capabilities: [130] Unknown (5)

FAX / Modem : 56K V.92, RJ-11

Non testé.

Port Infrarouge

Non testé.

Bluetooth

Status : fonctionne sans manipulation après installation

Wireless 802.11a/b/g

Status : fonctionne après installation ipw3945 (ne fonctionne pas avec iwl3945)

03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
        Subsystem: Intel Corporation Thinkpad  X60s, R60e model 0657
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at edf00000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express Legacy Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <512ns, L1 unlimited
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <128ns, L1 <64us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Device Serial Number 95-1b-8e-ff-ff-77-1b-00

Aug 31 21:40:03 localhost kernel: ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2d
Aug 31 21:40:03 localhost kernel: ipw3945: Copyright(c) 2003-2006 Intel Corporation
Aug 31 21:40:03 localhost kernel: ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Aug 31 21:40:04 localhost kernel: ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
Aug 31 21:40:11 localhost NetworkManager:   eth0: Device is fully-supported using driver 'ipw3945'.

Plus d'infos sur le chip : http://www.thinkwiki.org/wiki/Intel_PRO/Wireless_3945ABG_Mini-PCI_Express_Adapter

Ethernet 10/100/1000, RJ-45

Status : fonctionne sans manipulation après installation

02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
        Subsystem: Lenovo ThinkPad T60
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 217
        Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at 3000 [size=32]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
                Address: 00000000fee0300c  Data: 419a
        Capabilities: [e0] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <512ns, L1 <64us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <128ns, L1 <64us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Device Serial Number ec-29-c8-ff-ff-58-15-00

Aug 31 21:38:47 localhost kernel: e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:58:c8:29:ec
Aug 31 21:38:47 localhost kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Aug 31 21:40:11 localhost NetworkManager:   eth1: Device is fully-supported using driver 'e1000'.

Fingerprint Reader

Non testé (en cours)

Bus 005 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader

USB 2.0 (3 ports)

Status : fonctionne sans manipulation après installation

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)

Divers

Ecran D-Sub 15 : Oui Extension Réplicateur de ports / Docking station : Supporté

Touchpoint & Softpad

Status : fonctionne sans manipulation après installation

Aug 30 18:56:47 localhost kernel: Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
Aug 30 18:56:47 localhost kernel: input: SynPS/2 Synaptics TouchPad as /class/input/input2

Suspend/Resume

En cours... L'hibernation pose souci apparemment.